Back to Peripheral division

Prefeeders

The prefeeder is a machine suitable for picking up a stack of corrugated cardboard from a downstream transport system (supplied by the customer) and dividing the stack into bundles and / or scaling (overlapping sheets) in order to feed the processing machine into NO STOP even during battery change.

The feeder can be supplied for printing from below or for printing from above and for formats that can range from a minimum of 1.6 m up to over 5.5 m.

Our loaders can reach speeds of up to 500 sheets / minute with suitable formats and types of waves and models

Heights of cardboard stacks up to 2.2 m, management and interfacing of all functions via Siemens S7 PLC

Our loaders can be fixed to the ground with telescopic belts or installed on wheels

All our loaders have conveyor belts that can be tilted to create a space under them for any opening of the transformation machine and / or any space for maintenance or service on the transformation machine.

Top printing

The machines for top printing loaders are our REVOLVER and MINIREVOLVER models

REVOLVER

  • The main feature of this machine is the vertical lifting of the stack, which involves a reduction in the space required for installation and a high production speed
  • The stack coming from a conveyor placed before the loader, enters the Revolver conveyor, from here it is lifted and detached by bundles by the pusher that pushes it onto the belts from where it is sent into the revolver and then onto the conveyor belts
  • Automatic function
  • Management and interfacing of all functions via Siemens PLC
  • Type of workable cardboard: from micro wave (E) to triple (BC)
  • Feeding speed: up to 500 sheets / min. single wave
  • Power line socket, etc. totally synchronized and automatic
  • Max sheet size up to 3200 * 1600 mm.
  • Stack height capacity: 2000 mm.
  • Entrance platform with modular plastic belts
  • 6-position bundle turning device (3 loaded)
  • Electric pusher to separate the bundles from the stack
  • Automatic evacuation of the last sheets of the stack or pallet.
  • Remote assistance system

MINIREVOLVER

  • The main feature of this machine is the vertical lifting of the stack, which involves a reduction in the space required for installation and a high production speed
  • The stack coming from a tape placed before the magazine enters the Minirev introduction belt; from here it is lifted and by wads it is detached from the pusher that pushes it into the "revolver" and then onto the belts
  • Automatic function
  • Management and interfacing of all functions via Siemens S7 PLC
  • Type of workable cardboard: from micro wave (E) to triple (BC)
  • Feeding speed suitable for the Miniline machine: up to 500 sheets / min. single wave
  • Socket of the feeding line, centering, feeding, scaling, etc. totally synchronized and automatic
  • Max sheet size: 1850x800 mm.
  • Max stack height capacity: 1800 mm.
  • Stack loading height about 330 mm
  • Stack weight: up to 1300 kg.
  • Entrance platform with modular plastic belts to increase the stability of the pile
  • Machine without intermediate magazine and without continuous scaling
  • Machine with telescopic belts to adapt to the length of the sheet.
  • 4-position bundle turning device (2 loaded)
  • Automatic evacuation of the last sheets of the stack.
  • The device is composed of a motorized roller conveyor placed under the loader with one
  • pneumatic bulkhead that enables the passage of the last sheet (s). Modem for tele-assistance on board

Bottom printing

The bottom printing machine is our PACK FEEDER model in various sizes

PACK FEEDER

  • The main feature of this machine is the vertical lifting of the stack, which involves a reduction in the space required for installation and a high production speed
  • The stack, coming from a conveyor placed before the loader, enters the Acetal belt of the Pack Feeder loader; from here it is raised and by bundles it is detached from the pusher that pushes it onto the belts from where it is sent to the equalizing and scaling well and then goes to the introducer
  • Fully automatic function
  • Management and interfacing of all functions via Siemens S7 PLC
  • Electrical panel on board
  • Type of workable cardboard: from micro wave (E) to triple (BC)
  • Feeding speed: up to 500 sheets / minute with single thickness wave
  • Stack height capacity: 2200 mm
  • Max sheet size from: 1600x1200 mm to 5500x2500 mm.
  • Electric pusher to separate the bundles from the stack
  • Loading height of the piles about 330 mm.
  • Automatic evacuation of the last sheets of the stack or pallet
  • Front conveyor hydraulically liftable up to about 30 °
  • System for tele - assistance
  • Hydraulic, mechanical and electrical safety devices according to European standards