Vertical strapping machines

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The strapping head of proven efficiency, stably encircles the product with polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.

The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by the Lance for strapping inside the pallets in the CH1-1L version.

The motorized unwinder and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

The sheet feeder device places a protective sheet above and below the product, where the sliding of the strap would damage the exposed edges.

The Intermediate Stop device accelerates the strapping cycle.
The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in nine sizes, corresponding to three heights and three widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, stably encircle the product with a polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.
The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR1-1L MFC version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

The Short Sheet Feeder (MFC) device places a small and inexpensive protective sheet on the product, where the sliding of the strap would damage the exposed edges. The small size of the sheet allows its exact location on the product, allowing greater flexibility in the positioning of the strap.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twelve sizes, corresponding to four heights and three widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The strapping head of proven efficiency, stably encircles the product with polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.

The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by the Lance for strapping inside the pallets, in the PR1-1L version.

The motorized unwinder and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

Optionally, the assembly of the Intermediate Stop speeds up the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twenty formats, corresponding to four heights and five widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, stably encircle the product with a polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.
The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR2-2L MFC version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

The Short Sheet Feeder (MFC) device places a small and inexpensive protective sheet on the product, where the sliding of the strap would damage the exposed edges. The small size of the sheet allows its exact location on the product, allowing greater flexibility in the positioning of the strap.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twelve sizes, corresponding to four heights and three widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, stably encircle the product with a polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.
The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR2-2L MFLE version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

The sheet feeder device places a protective sheet on the product, where the sliding of the strap would damage the exposed edges.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twenty formats, corresponding to four heights and five widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, stably encircle the product with a polypropylene or polyester strap, sealing it tenaciously by thermal fusion, while the pressing plate compacts the pack.

The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR2-2L version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twenty formats, corresponding to four heights and five widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, one of which is mobile, stably encircle the product with a polypropylene or polyester strap, welding it tenaciously by thermal fusion, while the pressing plate compacts the pack.

The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR3-3L MFLE version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

The sheet feeder device places a protective sheet on the product, where the sliding of the strap would damage the exposed edges.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twenty formats, corresponding to four heights and five widths, to better adapt to the specifications required by the customer.

The Emmepi Vertical Strapping Machine combines the most up-to-date control and safety technologies in its sector with a sturdy, solid and durable mechanical structure.

The two strapping heads of proven efficiency, one of which is mobile, stably encircle the product with a polypropylene or polyester strap, welding it tenaciously by thermal fusion, while the pressing plate compacts the pack.

The machine is completed by a bidirectional motorized roller conveyor controlled with an inverter and by lances for strapping inside the pallets, in the PR3-3L version.

The motorized unwinders and the electrical panel are separated from the machine body to be placed in the optimal position in relation to the customer's layout.

The Touch Screen panel allows a simple machine / user interface for the use of the numerous programs the machine is equipped with.

A series of optional devices such as the Cross Table or the Fifth Wheel, extend the functionality of the machine, while the Intermediate Stop accelerates the strapping cycle.

The strapping machine can perform over 200 cycles per hour, depending on the size of the machine and the size of the product, as well as the options available.

Particular attention is dedicated to safety, as demonstrated by the perimeter protections with access doors controlled by safety microswitches, the photoelectric barriers with Muting function (for product and person recognition), the Anti-fall system of the Plate, the safety PLC.

A complete Periodic Maintenance Program and Teleservice (optional) guarantee the continuous operation of the strapping machine over time, minimizing any anomalies and providing prompt resolutions in addition to the traditional operation of the Emmepi Technical Assistance Service.

The machine is built in twenty formats, corresponding to four heights and five widths, to better adapt to the specifications required by the customer.

TC - WITH CROSS TABLE
Motorized roller conveyor for rotation of 90/180/270 degrees at a time with elevation of the pack by means of a hydraulic cylinder operated by a dedicated control unit and rotation with asynchronous motor.
All roller conveyors have a frame with feet and ground fixing (with dowels), the height from the ground is 320 mm, the rollers are 60 or 76 mm in diameter.
The traction is carried out with an asynchronous motor and reduction gear, optionally they are speed regulated with an inverter, the transmission is with chains and it is possible to manage them on the machine panel.

RL - WITH RALLA
Motorized roller conveyor for rotation of 90 degrees at a time, usable only in a machine with lance because it is not equipped with spinning wheels, with hydraulic or electric drive.
All roller conveyors have a frame with feet and ground fixing (with dowels), the height from the ground is 320 mm, the rollers are 60 or 76 mm in diameter.
The traction is carried out with an asynchronous motor and reduction gear, optionally they are speed regulated with an inverter, the transmission is with chains and it is possible to manage them on the machine panel.

CN - WITH CENTERER
Motorized roller conveyor with device that moves the pack up to place it in the center of the roller conveyor, driven by an asynchronous motor.
All roller conveyors have a frame with feet and ground fixing (with dowels), the height from the ground is 320 mm, the rollers are 60 or 76 mm in diameter.
The traction is carried out with an asynchronous motor and reduction gear, optionally they are speed regulated with an inverter, the transmission is with chains and it is possible to manage them on the machine panel.